If you search long enough, you’ll find 1,001 different methods to cook ribs, so it can be incredibly overwhelming to try to figure out the one method that will deliver the lip-smacking, finger-sucking, amazing spare ribs that you’re after.
Debunking the myth
Before we dive into my spare rib recipe, let’s get something straight right off the bat: amazing spare ribs don’t need to be complicated! If you stick around long enough, you’ll discover that I’m a huge fan of keeping things simple…and inexpensive.
People will give you all kinds of formulas (such as the 3-2-1 method) and tips for using ungodly amounts of aluminum foil for controlling the amount of smoke that the ribs take on and all kinds of other nonsense, but take all of that advice with a grain of salt because it simply isn’t necessary. Phenomenal spare ribs don’t have to be a pain in the butt!
Step 1 – Prepare the spare ribs
The very first thing you’ll want to do when you lay your spare ribs out on the cutting board is to clean them up. Remove the silver skin from the back, slice the skirt meat off (feel free to save it and cook separately!), and trim off any copious amounts of fat. The reason why you slice the skirt meat off the top is because it will cook much faster than the rest of the rack. The video below shows you exactly how to go about trimming and cleaning a rack of spare ribs:
When the extra meat and fat have been removed from the spare ribs, you’re left with what’s known as St. Louis style spare ribs – beautifully rectangular slabs that are nice and uniform, as seen below.
Step 2 – Slather and coat the spare ribs
At this point, you’re going to slather yellow mustard all over the ribs. Don’t worry about the mustard imparting flavor into the meat, because it won’t. It’s simply used as a “glue” to better hold the rub that you’ll be applying next.
As pictured below, don’t hold back on the rub. After the spare ribs are completely coated in yellow mustard, heavily apply your favorite BBQ rub (Meat Church rubs are my personal favorite) to each rack. The rub will work in conjunction with the mustard to develop an amazing, flavor-filled bark on the ribs as they smoke on the Kamado.
After the spare ribs are liberally coated with with mustard and BBQ rub, wrap them in plastic wrap and let them sit in the refrigerator for 24 hours or so. This will give the rub plenty of time to penetrate the rib meat and will give you maximum flavor potential.
Step 3 – Cook the spare ribs
Set the temperature of your Kamado to somewhere between 225F and 275F and throw a few chunks of your favorite smoke wood on (I tend to use hickory because it’s readily available, cheap, and imparts great flavor).
Place the spare ribs in a rib rack (this is the one I use), close the dome, and keep an eye on things. You don’t want to go much above 275F or you’ll run the risk of overcooking them.
After a couple hours on the Kamado, I like to coat the spares ribs with sauce. I try to get a couple coats in before serving them to layer on the flavor.
Pro tip: Want to duplicate that glistening sheen you see on competition ribs? Use a mixture of half BBQ sauce and half honey to coat your ribs and you’ll need sunglasses to look at them!
Step 4 – Serve ’em up!
To determine when my ribs are done cooking, I prefer to use the bend test where I’ll simply grab a slab in the middle with a pair of tongs and gently shake it up and down. If cracks appear between the individual ribs that run the length of the bone, I know they’re good to go.
Tell me these bad boys below don’t looks absolutely incredible!
So as I said, you can waste as much time and money as you want finagling with unnecessarily complex rib recipes, but the truth of the matter is that as long as you don’t overcook / over-smoke your ribs, they’re going to turn out amazingly well.
I highly suggest using a simple recipe, such as this one, next time you want to smoke spare ribs and see how they turn out. This will give you a good baseline for determining what tweaks are needed next time for making them uniquely yours.
Your thoughts?
There’s definitely no shortage of ways to prepare spare ribs, so I’d love to hear how Kamado Jim readers prefer to cook theirs. What works best for you? Do you swear by the Texas Crutch or is it completely unnecessary? Do you have any horror stories about completely ruining a grill full of slabs? Share your spare rib recipe secrets and storiesin the comments below!
Damn Simple, Damn Delicious Pork Spare Ribs Recipe
2014-11-22 22:20:05
Amazing spare ribs don't have to be a pain in the butt to cook. This simple rib recipe will turn out some of the best smoked spare ribs you've ever had with minimal effort.
Prep Time
30 min
Cook Time
4 hr
Total Time
4 hr 30 min
Prep Time
30 min
Cook Time
4 hr
Total Time
4 hr 30 min
Ingredients
- Spare ribs
- Mustard
- BBQ Sauce
- BBQ Rub (Meat Church Honey Hog is my personal favorite)
Instructions
- If your spare ribs aren't already trimmed, go ahead and trim the skirt meat off so you're left with a nice, rectangular section of St. Louis style spare ribs
- Remove as much of the membrane from the back of the ribs as you can
- Coat the ribs liberally with mustard, which is used to bind the rub onto the meat
- Coat the ribs liberally with BBQ rub
- Wrap each of the coated racks in plastic wrap and refrigerate for 24 hours
- Bring your Kamado up to 275F and place 5 chunks of hickory wood in
- Load the ribs on the Kamado and give them approximately 3 hours before testing for doneness
- At about 3 hours in, sauce the ribs and cook for another 30 minutes
- After another 30 minutes, sauce them again and test for doneness
- When the ribs pass the bend test (bend them slightly and look for a crack in the meat, from tip to tip), they're done!
By Kamado Jim
Kamado Jim https://kamadojim.com/
